resolucion de pantalla desbordado

[fedemos]

cuando decís que no da señal al bootear con el kernel nuevo, te referís desde el momento que se cierra grub y empieza la carga no da señal o que se ve el texto en la carga y al momento de entrar al programa gdm3 (donde te logueas), se cae la señal.

si es lo último podría llegar a ser un problema en la carga de las x (y probablemente tengas que instalar xserver-xorg-video-intel de bakpotrs ya que al fin y al cabo ese seria el driver de video)

para ver cual puede ser el error tendrías que postear el contenido de

cat /var/log/Xorg.0.log | egrep "^\(EE\)"  
cat /var/log/Xorg.0.log | egrep "^\(WW\)"

[darthsidious]

Que tal estimado fedemos, claro me refiero a cuando esta cargando el kernel nuevo, cuando esta cargando el grub pantalla negra con letras blancas se ve un poco y luego al terminar ya se pone negra la pantalla sin mostrar el gdm3 para el logueo. Intento con el driver que me pasaste y te paso los log del Xorg tengo Xorg.0.log, Xorg.0.log.old y Xorg.1.log:

log del Xorg.0.log:

[ 172.996] (II) intel(0): Output DP1 has no monitor section
[ 173.018] (II) intel(0): Output HDMI2 has no monitor section
[ 173.064] (II) intel(0): Output DP2 has no monitor section
[ 173.064] (II) intel(0): EDID for output VGA1
[ 173.086] (II) intel(0): EDID for output HDMI1
[ 173.132] (II) intel(0): EDID for output DP1
[ 173.154] (II) intel(0): EDID for output HDMI2
[ 173.200] (II) intel(0): EDID for output DP2
[ 173.200] (II) intel(0): Output VGA1 disconnected
[ 173.200] (II) intel(0): Output HDMI1 disconnected
[ 173.200] (II) intel(0): Output DP1 disconnected
[ 173.200] (II) intel(0): Output HDMI2 disconnected
[ 173.200] (II) intel(0): Output DP2 disconnected
[ 173.200] (WW) intel(0): No outputs definitely connected, trying again...
[ 173.200] (II) intel(0): Output VGA1 disconnected
[ 173.200] (II) intel(0): Output HDMI1 disconnected
[ 173.200] (II) intel(0): Output DP1 disconnected
[ 173.200] (II) intel(0): Output HDMI2 disconnected
[ 173.200] (II) intel(0): Output DP2 disconnected
[ 173.200] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 173.200] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 173.200] (II) intel(0): Kernel page flipping support detected, enabling
[ 173.200] (==) intel(0): DPI set to (96, 96)
[ 173.200] (II) Loading sub module "fb"
[ 173.200] (II) LoadModule: "fb"
[ 173.200] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 173.204] (II) Module fb: vendor="X.Org Foundation"
[ 173.205] compiled for 1.10.4, module version = 1.0.0
[ 173.205] ABI class: X.Org ANSI C Emulation, version 0.4
[ 173.205] (II) Loading sub module "dri2"
[ 173.205] (II) LoadModule: "dri2"
[ 173.205] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 173.205] (II) Module dri2: vendor="X.Org Foundation"
[ 173.205] compiled for 1.10.4, module version = 1.2.0
[ 173.205] ABI class: X.Org Server Extension, version 5.0
[ 173.205] (II) UnloadModule: "vesa"
[ 173.205] (II) Unloading vesa
[ 173.205] (II) UnloadModule: "fbdev"
[ 173.205] (II) Unloading fbdev
[ 173.205] (II) UnloadModule: "fbdevhw"
[ 173.205] (II) Unloading fbdevhw
[ 173.205] (==) Depth 24 pixmap format is 32 bpp
[ 173.205] (II) intel(0): [DRI2] Setup complete
[ 173.205] (II) intel(0): [DRI2] DRI driver: i965
[ 173.205] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 173.210] (II) UXA(0): Driver registered support for the following operations:
[ 173.210] (II) solid
[ 173.210] (II) copy
[ 173.210] (II) composite (RENDER acceleration)
[ 173.210] (II) put_image
[ 173.210] (II) get_image
[ 173.210] (==) intel(0): Backing store disabled
[ 173.210] (==) intel(0): Silken mouse enabled
[ 173.210] (II) intel(0): Initializing HW Cursor
[ 173.210] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 173.210] (==) intel(0): DPMS enabled
[ 173.210] (==) intel(0): Intel XvMC decoder enabled
[ 173.210] (II) intel(0): Set up textured video
[ 173.210] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 173.210] (II) intel(0): direct rendering: DRI2 Enabled
[ 173.210] (==) intel(0): hotplug detection: "enabled"
[ 173.211] (--) RandR disabled
[ 173.211] (II) Initializing built-in extension Generic Event Extension
[ 173.211] (II) Initializing built-in extension SHAPE
[ 173.211] (II) Initializing built-in extension MIT-SHM
[ 173.211] (II) Initializing built-in extension XInputExtension
[ 173.211] (II) Initializing built-in extension XTEST
[ 173.211] (II) Initializing built-in extension BIG-REQUESTS
[ 173.211] (II) Initializing built-in extension SYNC
[ 173.211] (II) Initializing built-in extension XKEYBOARD
[ 173.211] (II) Initializing built-in extension XC-MISC
[ 173.211] (II) Initializing built-in extension SECURITY
[ 173.211] (II) Initializing built-in extension XINERAMA
[ 173.211] (II) Initializing built-in extension XFIXES
[ 173.211] (II) Initializing built-in extension RENDER
[ 173.211] (II) Initializing built-in extension RANDR
[ 173.211] (II) Initializing built-in extension COMPOSITE
[ 173.211] (II) Initializing built-in extension DAMAGE
[ 173.211] (II) SELinux: Disabled on system
[ 173.294] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 173.294] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 173.294] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 173.294] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 173.294] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 173.294] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 173.294] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 173.615] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 173.616] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.616] (II) LoadModule: "evdev"
[ 173.616] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.642] (II) Module evdev: vendor="X.Org Foundation"
[ 173.642] compiled for 1.10.3, module version = 2.6.0
[ 173.642] Module class: X.Org XInput Driver
[ 173.642] ABI class: X.Org XInput driver, version 12.2
[ 173.642] (II) Using input driver 'evdev' for 'Power Button'
[ 173.642] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.642] (**) Power Button: always reports core events
[ 173.642] (**) Power Button: Device: "/dev/input/event3"
[ 173.642] (--) Power Button: Found keys
[ 173.642] (II) Power Button: Configuring as keyboard
[ 173.642] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 173.642] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 173.642] (**) Option "xkb_rules" "evdev"
[ 173.642] (**) Option "xkb_model" "pc105"
[ 173.642] (**) Option "xkb_layout" "latam"
[ 173.663] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 173.663] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 173.663] (II) Using input driver 'evdev' for 'Power Button'
[ 173.663] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.663] (**) Power Button: always reports core events
[ 173.663] (**) Power Button: Device: "/dev/input/event2"
[ 173.663] (--) Power Button: Found keys
[ 173.663] (II) Power Button: Configuring as keyboard
[ 173.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 173.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 173.663] (**) Option "xkb_rules" "evdev"
[ 173.663] (**) Option "xkb_model" "pc105"
[ 173.663] (**) Option "xkb_layout" "latam"
[ 173.664] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/event1)
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Applying InputClass "evdev pointer catchall"
[ 173.664] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0'
[ 173.664] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: always reports core events
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Device: "/dev/input/event1"
[ 173.664] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found 3 mouse buttons
[ 173.664] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found scroll wheel(s)
[ 173.664] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found relative axes
[ 173.664] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found x and y relative axes
[ 173.664] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Configuring as mouse
[ 173.664] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Adding scrollwheel support
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: YAxisMapping: buttons 4 and 5
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 173.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 173.664] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0" (type: MOUSE)
[ 173.664] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: initialized for relative axes.
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) keeping acceleration scheme 1
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration profile 0
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration factor: 2.000
[ 173.664] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration threshold: 4
[ 173.664] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/mouse0)
[ 173.664] (II) No input driver/identifier specified (ignoring)
[ 173.666] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 173.666] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 173.666] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 173.666] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.666] (**) AT Translated Set 2 keyboard: always reports core events
[ 173.667] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 173.667] (--) AT Translated Set 2 keyboard: Found keys
[ 173.667] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 173.667] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 173.667] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 173.667] (**) Option "xkb_rules" "evdev"
[ 173.667] (**) Option "xkb_model" "pc105"
[ 173.667] (**) Option "xkb_layout" "latam"
[ 173.667] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 173.667] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 173.667] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 173.667] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 173.667] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 173.667] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 173.667] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 173.667] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 173.667] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 173.667] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 173.667] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 173.667] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 173.667] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 173.667] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 173.667] (II) No input driver/identifier specified (ignoring)
[ 173.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 173.667] (II) No input driver/identifier specified (ignoring)


log de Xorg.1.log:
[ 5158.148] (II) Unloading fbdev
[ 5158.148] (II) UnloadModule: "fbdevhw"
[ 5158.148] (II) Unloading fbdevhw
[ 5158.148] (==) Depth 24 pixmap format is 32 bpp
[ 5158.148] (II) intel(0): [DRI2] Setup complete
[ 5158.148] (II) intel(0): [DRI2] DRI driver: i965
[ 5158.148] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 5158.149] (II) UXA(0): Driver registered support for the following operations:
[ 5158.149] (II) solid
[ 5158.149] (II) copy
[ 5158.149] (II) composite (RENDER acceleration)
[ 5158.149] (II) put_image
[ 5158.149] (II) get_image
[ 5158.149] (==) intel(0): Backing store disabled
[ 5158.149] (==) intel(0): Silken mouse enabled
[ 5158.149] (II) intel(0): Initializing HW Cursor
[ 5158.149] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5158.149] (==) intel(0): DPMS enabled
[ 5158.149] (==) intel(0): Intel XvMC decoder enabled
[ 5158.149] (II) intel(0): Set up textured video
[ 5158.149] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 5158.149] (II) intel(0): direct rendering: DRI2 Enabled
[ 5158.149] (==) intel(0): hotplug detection: "enabled"
[ 5158.149] (--) RandR disabled
[ 5158.149] (II) Initializing built-in extension Generic Event Extension
[ 5158.149] (II) Initializing built-in extension SHAPE
[ 5158.149] (II) Initializing built-in extension MIT-SHM
[ 5158.149] (II) Initializing built-in extension XInputExtension
[ 5158.149] (II) Initializing built-in extension XTEST
[ 5158.149] (II) Initializing built-in extension BIG-REQUESTS
[ 5158.149] (II) Initializing built-in extension SYNC
[ 5158.149] (II) Initializing built-in extension XKEYBOARD
[ 5158.149] (II) Initializing built-in extension XC-MISC
[ 5158.149] (II) Initializing built-in extension SECURITY
[ 5158.149] (II) Initializing built-in extension XINERAMA
[ 5158.149] (II) Initializing built-in extension XFIXES
[ 5158.149] (II) Initializing built-in extension RENDER
[ 5158.149] (II) Initializing built-in extension RANDR
[ 5158.149] (II) Initializing built-in extension COMPOSITE
[ 5158.149] (II) Initializing built-in extension DAMAGE
[ 5158.149] (II) SELinux: Disabled on system
[ 5158.155] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5158.155] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5158.155] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5158.155] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 5158.155] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5158.155] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 5158.155] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5158.176] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5158.176] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5158.176] (II) LoadModule: "evdev"
[ 5158.176] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.176] (II) Module evdev: vendor="X.Org Foundation"
[ 5158.176] compiled for 1.10.3, module version = 2.6.0
[ 5158.176] Module class: X.Org XInput Driver
[ 5158.176] ABI class: X.Org XInput driver, version 12.2
[ 5158.176] (II) Using input driver 'evdev' for 'Power Button'
[ 5158.176] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.176] (**) Power Button: always reports core events
[ 5158.176] (**) Power Button: Device: "/dev/input/event3"
[ 5158.176] (--) Power Button: Found keys
[ 5158.176] (II) Power Button: Configuring as keyboard
[ 5158.176] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 5158.176] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 5158.176] (**) Option "xkb_rules" "evdev"
[ 5158.176] (**) Option "xkb_model" "pc105"
[ 5158.176] (**) Option "xkb_layout" "latam"
[ 5158.190] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5158.190] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5158.190] (II) Using input driver 'evdev' for 'Power Button'
[ 5158.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.190] (**) Power Button: always reports core events
[ 5158.190] (**) Power Button: Device: "/dev/input/event2"
[ 5158.190] (--) Power Button: Found keys
[ 5158.190] (II) Power Button: Configuring as keyboard
[ 5158.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 5158.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 5158.190] (**) Option "xkb_rules" "evdev"
[ 5158.190] (**) Option "xkb_model" "pc105"
[ 5158.190] (**) Option "xkb_layout" "latam"
[ 5158.191] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/event1)
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Applying InputClass "evdev pointer catchall"
[ 5158.191] (II) Using input driver 'evdev' for 'Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0'
[ 5158.191] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: always reports core events
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Device: "/dev/input/event1"
[ 5158.191] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found 3 mouse buttons
[ 5158.191] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found scroll wheel(s)
[ 5158.191] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found relative axes
[ 5158.191] (--) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Found x and y relative axes
[ 5158.191] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Configuring as mouse
[ 5158.191] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Adding scrollwheel support
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: YAxisMapping: buttons 4 and 5
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5158.191] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6/event1"
[ 5158.191] (II) XINPUT: Adding extended input device "Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0" (type: MOUSE)
[ 5158.191] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: initialized for relative axes.
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) keeping acceleration scheme 1
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration profile 0
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration factor: 2.000
[ 5158.191] (**) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: (accel) acceleration threshold: 4
[ 5158.192] (II) config/udev: Adding input device Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 (/dev/input/mouse0)
[ 5158.192] (II) No input driver/identifier specified (ignoring)
[ 5158.194] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5158.194] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5158.194] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 5158.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.194] (**) AT Translated Set 2 keyboard: always reports core events
[ 5158.194] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 5158.194] (--) AT Translated Set 2 keyboard: Found keys
[ 5158.194] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 5158.194] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5158.194] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 5158.194] (**) Option "xkb_rules" "evdev"
[ 5158.194] (**) Option "xkb_model" "pc105"
[ 5158.194] (**) Option "xkb_layout" "latam"
[ 5158.194] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 5158.194] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 5158.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 5158.194] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 5158.194] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 5158.194] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 5158.194] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 5158.194] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 5158.194] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5158.194] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 5158.194] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 5158.194] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 5158.194] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 5158.195] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 5158.195] (II) No input driver/identifier specified (ignoring)
[ 5158.195] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 5158.195] (II) No input driver/identifier specified (ignoring)
[ 5162.438] (II) intel(0): EDID vendor "GSM", prod id 19373
[ 5162.438] (II) intel(0): Using EDID range info for horizontal sync
[ 5162.438] (II) intel(0): Using EDID range info for vertical refresh
[ 5162.438] (II) intel(0): Printing DDC gathered Modelines:
[ 5162.438] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
[ 5162.438] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 5162.438] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 5162.438] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 5162.438] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 5162.438] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 5162.438] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 5162.438] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 5162.438] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 5162.577] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 5193.148] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5195.682] (II) ImPS/2 Generic Wheel Mouse: Close
[ 5195.682] (II) UnloadModule: "evdev"
[ 5195.682] (II) Unloading evdev
[ 5195.682] (II) AT Translated Set 2 keyboard: Close
[ 5195.682] (II) UnloadModule: "evdev"
[ 5195.682] (II) Unloading evdev
[ 5195.682] (II) Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0: Close
[ 5195.682] (II) UnloadModule: "evdev"
[ 5195.682] (II) Unloading evdev
[ 5195.682] (II) Power Button: Close
[ 5195.682] (II) UnloadModule: "evdev"
[ 5195.682] (II) Unloading evdev
[ 5195.682] (II) Power Button: Close
[ 5195.682] (II) UnloadModule: "evdev"
[ 5195.682] (II) Unloading evdev

Muchas gracias, saludos!

[darthsidious]

Estimado fedemos, tambien trate de instalar el driver de video que me pasas, aparentemente ya lo tengo instalado:

apt-get install xserver-xorg-video-intel
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
xserver-xorg-video-intel ya está en su versión más reciente.
fijado xserver-xorg-video-intel como instalado manualmente.
0 actualizados, 0 se instalarán, 0 para eliminar y 9 no actualizados

Gracias, saludos

[fedemos]

hola darthsidious estaba mirando el Xorg.0.log y el Xorg.1.log pero veo que no sale ningún error (EE) aunque si algunas advertencias (WW)

[ 173.200] (WW) intel(0): No outputs definitely connected, trying again... 
[ 173.200] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer

sobre el tema del driver xserver-xorg-video-intel yo me refería al que se encuentra en los repositorios de backports para debian squeeze

xserver-xorg-video-intel (2:2.13.0-6
http://packages.debian.org/squeeze/x...rg-video-intel

xserver-xorg-video-intel (2:2.15.0-3~bpo60+2) [backports]
http://packages.debian.org/squeeze-b...rg-video-intel

para instalarlo podrías hacerlo desde synaptic de la misma forma que utilizaste para instalar el kernel

* también podrías probar de instalar el kernel rt de bacports con synaptic

linux-image-3.2.0-0.bpo.2-rt-amd64 (3.2.15-1~bpo60+1) [backports]
http://packages.debian.org/squeeze-b...rg-video-intel

si este funciona correctamente puedes eliminar el otro kernel de backports

saludos...

[darthsidious]

EStimado fedemos, con el gestor de paquetes trate de instalar el driver que me recomendas pero ya lo tengo, en realidad tengo una version mas actual (2:2.15.0-3~bpo60+2) lo que hice fue reinstalarla pero no obtuve solucion al problema.
Tambien instale el otro kernel que me recomendas, linux-image-3.2.0-0.bpo.2-rt-amd64 (3.2.15-1~bpo60+1) [backports] y al reiniciar la pc y bootear con éste kernel tampoco me mando señal, tuve que reinciarla varias veces con el kernel 2.6 y un par de mañas mas como entrar en modo consola volver al entorno grafico y reiniciarla para que al bootear con el kernel nuevo entre mande señal el gnome...que revelde que esta esta maquina por dios...muchas gracias.
Saludos!

[fedemos]

hola darthsidiou, esto me tiene un poco desconcertado, ya que por lógica con el kernel 3 + el driver de video intel tu i7 tendría que estar funcionando sin problemas. y encima en tu Xorg.0.log no hay errores

tengo una notebook con un core i3 segunda generación y gráfica intel, corriendo en un debian 7 wheezy (testing) con gnome 3.4 y todo funciona bien.

A lo mejor se podrías realizar una instalación limpia pero con un debian testing y si no te gusta gnome3 podrías probar kde o lxde xfce o el fork de gnome2 que se llama mate (mate es un poco complicado de instalar pero no imposible)

http://cdimage.debian.org/cdimage/da.../amd64/iso-cd/

para este tipo de instalaciones se requiere conexión a Internet y la instalación, dependiendo del tipo de conexión, puede durar hasta dos horas.

si querés podes descargar el businesscard.iso
que pesa solo 67mb y trae únicamente el instalador (el netinst.iso trae el instalador y el sistema base )

saludos...

[darthsidious]

Hola Estimado Fedemos, si como decis, muy desconcertante esta maquinita perversa! Podria ser de intalar el wheezy con gnome 3.4 para ver como me va o sino con otra interface gráfica. Por último otra consulta, cuando ya tenes instalado el grub y un debian por mas que tengas un dvd para instalar otro linux y por bios el 1er boot desde la lectora de dvd como haces para que bootee realmente del dvd porque ni bola con el grub pasa directamente. Muchas gracias.
Saludos!

[fedemos]

con respecto al tema del orden de booteo, el mismo se configura desde la bios. si al poner el DVD y reiniciar la pc esta no bootea en primer lugar la unidad lecto/grabadora de CD/DVD, tendrías que revisar el orden de booteo desde la bios.

[darthsidious]

muchas gracias fedemos. Saludos!