################################################## ####################
# Runtime configuration file for Exim #
################################################## ####################
# Mysql specific stuff.
# Mysql server
MYSQL_AUTHSERVER=localhost
# Mysql server port
MYSQL_AUTHPORT=3306
# Mysql database
MYSQL_AUTHDB=mail
# Mysql table used for authentication
MYSQL_AUTHTABLE=auth
# Username and password to connect to mysql server
MYSQL_AUTHUSER=mail
MYSQL_AUTHPASSWORD=mail_pc
MYSQL_USERNAMEFIELD=username
MYSQL_DOMAINFIELD=domain
MYSQL_ALIASFIELD=alias
MYSQL_ISALIASFIELD=is_alias
# Timeout for pop before mysql authentication for relaying
# See mysql documentation for DATE_ADD for exact format
RELAY_TIMEOUT=10 MINUTE
# Note. I have used LIKE instead of '=' as the current exim quoting
# quotes characters like '_' and '%' which is then not correctly
# interpreted by mysql. If the exim quoting changes in future
# the current solution will break.
MYSQL_ALIAS = SELECT MYSQL_ALIASFIELD FROM MYSQL_AUTHTABLE WHERE MYSQL_DOMAINFIELD LIKE '${quote_mysql
domain}' AND MYSQL_USERNAMEFIELD LIKE '${quote_mysql
local_part}' AND MYSQL_ISALIASFIELD='yes'
MYSQL_ALL_ALIAS = SELECT MYSQL_ALIASFIELD FROM MYSQL_AUTHTABLE WHERE MYSQL_DOMAINFIELD='${quote_mysql
domain}' AND MYSQL_USERNAMEFIELD='@' AND MYSQL_ISALIASFIELD='yes'
MYSQL_USER = SELECT DISTINCT MYSQL_DOMAINFIELD FROM MYSQL_AUTHTABLE WHERE MYSQL_DOMAINFIELD LIKE '${quote_mysql
domain}' AND MYSQL_USERNAMEFIELD LIKE '${quote_mysql
local_part}' AND MYSQL_ISALIASFIELD='no'
MYSQL_DOMAIN = SELECT DISTINCT MYSQL_DOMAINFIELD FROM MYSQL_AUTHTABLE WHERE MYSQL_DOMAINFIELD='$key'
# The following is for pop before smtp authentication for relaying
# If you dont use this feature comment the following line and uncomment
# the next line
MYSQL_RELAY = SELECT ip FROM relay_ip WHERE ip="${sender_host_address}" AND DATE_SUB(NOW(), INTERVAL 10 MINUTE) < ts
# MYSQL_RELAY =
# Additional mysql servers can be added here. See exim documentation
mysql_servers = "MYSQL_AUTHSERVER::MYSQL_AUTHPORT/MYSQL_AUTHDB/MYSQL_AUTHUSER/MYSQL_AUTHPASSWORD"
# Domains that should be delivered locally, ie into local users mailboxes
LOCAL_DOMAINS = localhost
# This is a default configuration file which will operate correctly in
# uncomplicated installations. Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file. There are many more than are mentioned here. The
# manual is in the file doc/spec.txt in the Exim distribution as a plain
# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
# from the Exim ftp sites. The manual is also online via the Exim web sites.
# This file is divided into several parts, all but the last of which are
# terminated by a line containing the word "end". The parts must appear
# in the correct order, and all must be present (even if some of them are
# in fact empty). Blank lines, and lines starting with # are ignored.
################################################## ####################
# MAIN CONFIGURATION SETTINGS #
################################################## ####################
# Specify your host's canonical name here. This should normally be the fully
# qualified "official" name of your host. If this option is not set, the
# uname() function is called to obtain the name.
primary_hostname = host.dominio.com.ar
# Specify the domain you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@" character
# followed by a domain. For example, "caesar@rome.ex" is a fully qualified
# address, but the string "caesar" (i.e. just a login name) is an unqualified
# email address. Unqualified addresses are accepted only from local callers by
# default. See the receiver_unqualified_{hosts,nets} options if you want
# to permit unqualified addresses from remote sources. If this option is
# not set, the primary_hostname value is used for qualification.
# qualify_domain =
# If you want unqualified recipient addresses to be qualified with a different
# domain to unqualified sender addresses, specify the recipient domain here.
# If this option is not set, the qualify_domain value is used.
# qualify_recipient =
spool_directory = /var/spool/exim
# Specify your local domains as a colon-separated list here. If this option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do not want
# to do any local deliveries, uncomment the following line, but do not supply
# any data for it. This sets local_domains to an empty string, which is not
# the same as not mentioning it at all. An empty string specifies that there
# are no local domains; not setting it at all causes the default value (the
# setting of qualify_recipient) to be used.
local_domains = LOCAL_DOMAINS:mysql;MYSQL_DOMAIN
# If you want to accept mail addressed to your host's literal IP address, for
# example, mail addressed to "user@[111.111.111.111]", then uncomment the
# following line, or supply the literal domain(s) as part of "local_domains"
# above. You also need to comment "forbid_domain_literals" below. This is not
# recommended for today's Internet.
# local_domains_include_host_literals
# The following line prevents Exim from recognizing addresses of the form
# "user@[111.111.111.111]" that is, with a "domain literal" (an IP address)
# instead of a named domain. The RFCs still require this form, but it makes
# little sense to permit mail to be sent to specific hosts by their IP address
# in the modern Internet, and this ancient format has been used by those
# seeking to abuse hosts by using them for unwanted relaying. If you really
# do want to support domain literals, remove the following line, and see
# also the "domain_literal" router below.
forbid_domain_literals
# No local deliveries will ever be run under the uids of these users (a colon-
# separated list). An attempt to do so gets changed so that it runs under the
# uid of "nobody" instead. This is a paranoic safety catch. Note the default
# setting means you cannot deliver mail addressed to root as if it were a
# normal user. This isn't usually a problem, as most sites have an alias for
# root that redirects such mail to a human administrator.
never_users = root
# The use of your host as a mail relay by any host, including the local host
# calling its own SMTP port, is locked out by default. If you want to permit
# relaying from the local host, you should set
#
host_accept_relay = localhost:mysql;MYSQL_RELAY
#
# If you want to permit relaying through your host from certain hosts or IP
# networks, you need to set the option appropriately, for example
#
# host_accept_relay = my.friends.host : 131.111.0.0/16
#
# If you are an MX backup or gateway of some kind for some domains, you must
# set relay_domains to match those domains. This will allow any host to
# relay through your host to those domains.
#
# See the section of the manual entitled "Control of relaying" for more
# information.
# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.
# host_lookup = 0.0.0.0/0
# By default, Exim expects all envelope addresses to be fully qualified, that
# is, they must contain both a local part and a domain. If you want to accept
# unqualified addresses (just a local part) from certain hosts, you can specify
# these hosts by setting one or both of
#
# receiver_unqualified_hosts =
# sender_unqualified_hosts =
#
# to control sender and receiver addresses, respectively. When this is done,
# unqualified addresses are qualified using the settings of qualify_domain
# and/or qualify_recipient (see above).
# By default, Exim does not make any checks, other than syntactic ones, on
# incoming addresses during the SMTP dialogue. This reduces delays in SMTP
# transactions, but it does mean that you might accept messages with unknown
# recipients, and/or bad senders.
# Uncomment this line if you want incoming recipient addresses to be verified
# during the SMTP dialogue. Unknown recipients are then rejected at this stage,
# and the generation of a failure message is the job of the sending host.
receiver_verify
# Uncomment this line if you want incoming sender addresses (return-paths) to
# be verified during the SMTP dialogue. Verification can normally only check
# that the domain exists.
# sender_verify
# Exim contains support for the Realtime Blocking List (RBL) that is being
# maintained as part of the DNS. See
http://maps.vix.com/rbl/ for background.
# Uncommenting the first line below will make Exim reject mail from any
# host whose IP address is blacklisted in the RBL at maps.vix.com. Some
# others have followed the RBL lead and have produced other lists: DUL is
# a list of dial-up addresses, and ORBS is a list of open relay systems. The
# second line below checks all three lists.
# rbl_domains = rbl.maps.vix.com
# rbl_domains = rbl.maps.vix.com:dul.maps.vix.com:relays.orbs.org
# If you want Exim to support the "percent hack" for all your local domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part.
# percent_hack_domains = *
# timeout_frozen_after = 2d
# auto_thaw = 5m
# relay_match_host_or_sender
# sender_address_relay = *
end
################################################## ####################
# TRANSPORTS CONFIGURATION #
################################################## ####################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
################################################## ####################
# A transport is used only when referenced from a director or a router that
# successfully handles an address.
# This transport is used for delivering messages over SMTP connections.
remote_smtp:
driver = smtp
# This transport is used for local delivery to user mailboxes in traditional
# BSD mailbox format. By default it will be run under the uid and gid of the
# local user, and requires the sticky bit to be set on the /var/mail directory.
# Some systems use the alternative approach of running mail deliveries under a
# particular group instead of using the sticky bit. The commented options below
# show how this can be done.
#local_delivery:
# driver = appendfile
# file = /var/spool/mail/${local_part}
# delivery_date_add
# envelope_to_add
# return_path_add
# group = mail
# mode = 0660
local_delivery:
driver = appendfile
# file = /var/mail/${domain}/${local_part}
file = /var/mail/${local_part}
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
quota = 30M
quota_warn_message = "\
To: $local_part@$domain\n\
Subject: Your mailbox\n\n\
This message is automatically created \
by mail delivery software.\n\n\
The size of your mailbox has exceeded \
a warning threshold that is\n\
set by the system administrator.\n"
quota_warn_threshold = 85%
virtual_delivery:
driver = appendfile
file = /var/spool/virtual_mail/${domain}/${local_part}
user = mail
group = mail
mode = 0660
quota = 30M
quota_warn_message = "\
To: $local_part@$domain\n\
Subject: Your mailbox\n\n\
This message is automatically created \
by mail delivery software.\n\n\
The size of your mailbox has exceeded \
a warning threshold that is\n\
set by the system administrator.\n"
quota_warn_threshold = 85%
# This transport is used for handling pipe deliveries generated by alias
# or .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe in the directors
# section below.
address_pipe:
driver = pipe
return_output
# This transport is used for handling deliveries directly to files that are
# generated by aliassing or forwarding.
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director.
address_reply:
driver = autoreply
end
################################################## ####################
# DIRECTORS CONFIGURATION #
# Specifies how local addresses are handled #
################################################## ####################
# ORDER DOES MATTER #
# A local address is passed to each in turn until it is accepted. #
################################################## ####################
# Local addresses are those with a domain that matches some item in the
# "local_domains" setting above, or those which are passed back from the
# routers because of a "self=local" setting (not used in this configuration).
# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary. Alternatively, you
# can specify "user" on the transports that are used. Note that those
# listed below are the same as are used for .forward files; you might want
# to set up different ones for pipe and file deliveries from aliases.
system_aliases:
driver = aliasfile
domains = LOCAL_DOMAINS
file = /etc/aliases
search_type = lsearch
user = listar
group = listar
file_transport = address_file
pipe_transport = address_pipe
# This director handles forwarding using traditional .forward files.
# If you want it also to allow mail filtering when a forward file
# starts with the string "# Exim filter", uncomment the "filter" option.
# The no_verify setting means that this director will be skipped when
# verifying addresses if sender_verify or receiver_verify is set (though
# they are not set by default). Similarly, no_expn means that this director
# will be skipped if smtp_expn_hosts is set to allow any hosts to use the
# EXPN command.
# The check_ancestor option means that if the forward file generates an
# address that is an ancestor of the current one, the current one gets
# passed on instead. This covers the case where A is aliased to B and B
# has a .forward file pointing to A.
# The three transports specified at the end are those that are used when
# forwarding generates a direct delivery to a file, or to a pipe, or sets
# up an auto-reply, respectively.
userforward:
driver = forwardfile
domains = LOCAL_DOMAINS
file = .forward
no_verify
no_expn
check_ancestor
# filter
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
# This director matches local user mailboxes.
localuser:
driver = localuser
domains = LOCAL_DOMAINS
transport = local_delivery
# Check if user is a real user in mysql database
virtual_local_user:
domains = ${lookup mysql {MYSQL_USER}{$value}}
driver = smartuser
transport = virtual_delivery
# Check if user is an alias in mysql database
virtual_aliases:
driver = aliasfile
search_type = mysql
query = MYSQL_ALIAS
user = listar
group = listar
include_domain = true
pipe_transport = address_pipe
# Check for wild card match '@'@domain in mysql database
virtual_all_alias:
driver = aliasfile
search_type = mysql
query = MYSQL_ALL_ALIAS
include_domain = true
end
################################################## ####################
# ROUTERS CONFIGURATION #
# Specifies how remote addresses are handled #
################################################## ####################
# ORDER DOES MATTER #
# A remote address is passed to each in turn until it is accepted. #
################################################## ####################
# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.
# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.
lookuphost:
driver = lookuphost
transport = remote_smtp
# This router routes to remote hosts over SMTP by explicit IP address,
# when an email address is given in "domain literal" form, for example,
# <user@[192.168.35.64]>. The RFCs require this facility. However, it is
# little-known these days, and has been exploited by evil people seeking
# to abuse SMTP relays. Consequently it is commented out in the default
# configuration. If you uncomment this router, you also need to comment out
# "forbid_domain_literals" above, so that Exim can recognize the syntax of
# domain literal addresses.
# domain_literal:
# driver = ipliteral
# transport = remote_smtp
end
################################################## ####################
# RETRY CONFIGURATION #
################################################## ####################
# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the first
# failed delivery.
# Domain Error Retries
# ------ ----- -------
# * quota_7d
# * quota F,2h,15m; F,3d,1h
* quota
* * F,2h,15m; G,16h,1h,1.5; F,1d,8h
end
################################################## ####################
# REWRITE CONFIGURATION #
################################################## ####################
# There are no rewriting specifications in this default configuration file.
end
################################################## ####################
# AUTHENTICATION CONFIGURATION #
################################################## ####################
# There are no authenticator specifications in this default configuration file.
# End of Exim configuration file
PD: Dale un pez a un hombre y comerá un día; enseñalo a pescar y comerá siempre.
