listones o moños con cinta alambrada
-
Hola a todos, por favor necesito de su ayuda. Alguien tiene informacion acerca de la confeccion de moños, listones o lazos en cinta alambrada.
Mil gracias por su ayuda.
Ghin -
Hola Bienvenido/a.....
te paso algunos modelitos de moños....
suerte....
chaussss
Necesitas liston ancho que sea moldeable(con alambre en la orilla)y hilo
grapas, alambre decorativo o cualquier cosa de tu preferencia.Tijeras .
Mesclado con mucha paciencia.
Corta 50cm de liston, y une las puntas pegandolas al centro del mismo
(cuida que las puntas unidas esten centradas no en un lado.) repite los mismos
pasos 4 veces,haciendo 2 tiras de 50 cm y 2 de 35 o 40 cm en total 4.
Cuando termines de unir, las piezas de 50cm las volveras a unir una
sobre la otra y tendras una ( +) cruz. Lo mismo haras con las de 40cm
y obtendras otra cruz . terminando esto, uniras la cruz mas pequena
sobre la mas grande en forma de x, asi tendras un mono para tu arbol
de navidad o para lo que quieras, tendras una + y una x cuando las unas
esegurate que esten bienfirmes y las orillas las moldeas en forma abon-
badas para que se luscan mejor.
Offray Florist Bow
MATERIALS (for one)3 yds. ribbon
DIRECTIONS
1. 8" from one end of ribbon, pinch firmly between thumb and index finger.
2. Make a 5" loop (half the size of finished bow) pinch tightly. If ribbon is one-sided, twist length to right side. Make second loop and pinch over first two pinches.
3. Repeat this process forming 4 loops on each side.
4. Make a center knot by forming a small loop over your thumb, pinch and wire all loops together, trim excess. Wire 14" length to back for tails.Offray Pompom Bow
MATERIALS (for one)5 yds. ribbon
Small piece of wire
DIRECTIONS1. With ribbon, form a 9" loop equal in size to the diameter of the finished bow.
2. Wrap remaining ribbon around loop as many times as is desired for bow.
3. Flatten loops and cut off triangles at end, being careful not to cut too close to the center.
4. Bring ends together to meet in center, overlapping triangles.
5. Secure ribbon at center over notches with wire. Pull out loops, twist towards center, alternating sides to form pompom.
Offray Starburst Bow
MATERIALS (for one)2 yds. ribbon
DIRECTIONS1. Form a loop about 5" long, pinch between thumb and index finger.
2. Bring ribbon down and up to form a bottom 5" loop. Repeat to form second set of loops. Cut off excess ribbon and wire center tightly.
3. Cut two 14" lengths and one 5" length. Gather 14" lengths at centers and wire to either side of bow.
4. Glue 5" length around center, fold the long end in if necessary.
Offray Pinwheel Bow
MATERIALS64" ribbon (If using two ribbons 32" of each)
Small piece of wire
DIRECTIONS1. Cut ribbons into 8" lengths for finished bow.
2. One by one, pick up ribbons and pinch together at center.
3. Wire centers tightly.
4. Separate or fan out ribbon layers.
Offray Dior Bow
MATERIALS (for one)2 yds. ribbon
DIRECTIONS1. Cut ribbon into 5 lengths: 5", 10", 14", 18", and 22".
2. Form loops, overlapping centers and glue in place.
3. Glue loops together.
4. Wrap smaller length around center.
5. Glue to underside of bow.
Offray Package Bow
MATERIALS (for one)3 yds. ribbon
Small piece of wire
DIRECTIONS1. Hold ribbon 4" from one end and make 4" loop.
2. Bring long length down and up to make bottom loop.
3. Repeat back and fourth looping until you have 9 on each side. Wrap around center securely with wire.
4. Shape bow.
-
amigas por favor mandenme todos los los modelos que tengan a mi correo , tengo una niña que es muy mona y tiene el cabello largo me gustaria hacerle yo misma para combinar con su ropita. gracias elsaqs@live.com.ar

2