[AYUDA] Programas, tutoriales, todo para tu Motorola

Changes from Previous Versions:

2.6.1.0 -> 2.6.2.0
1.  Small change to Motodrv.sys to resolve missing import issue on Win2k.
2.  Include RAZR1x configuration 8 PIDs and Salinas bootloader in unsigned P2k.inf.

2.6.0.0 -> 2.6.1.0
1.  Motport.sys:  USB COM port driver used for CDMA dual mode and Salinas/Ajar platform devices.  This replaces mqdmserd.sys on dual mode.
2.  Motcomposite.inf:  Loads the composite class generic parent driver (usbhub.sys or usbccgp.sys) for CDMA dual mode devices, as well as config 8 for some P2K phones with broken descriptors.  This replaces mqdmbus.inf, motcomp2k.inf, motcompxp.inf, and motcompxp64.inf.
3.  Motodrv.inf:  Certified composite class/”P2k” driver for all PIDs that were previously in p2k.inf, Motodrv.inf, and motmccip2k.inf.  The unsigned “P2k.inf” will be introduced as necessary to support new devices.
4.  Motmodem.inf:  The modem entries for Q and Norman were merged into this file, deprecating smartfon1.inf.
5.  Motmodem.sys:  Resolve hang in predial terminal window issue (or LIBkk77996).
6.  Resolved “Invalid Argument” issue in the driver installer for users with non-English locales.
7.  Properly clean up iDEN devices (VID 0C44) in the driver installer.

2.5.2.0 -> 2.6.0.0
1.  Motousbnet.sys:  update to 1.7 to resolve remaining assertion failures in GNPO.
2.  Motmodem.sys:  new WHQLed (XP x86/Vista x86/XP x64/Vista x86) USB modem driver for all devices.  This replaces:  USBMOT2000/motomdm2/usbser2k/usbserxp/usbsermpt/usbsermptxp/mqdmmdm.  The package is set up to remove any instances of those files that it finds.
3.  Smartfon1 (Q/Norman modem) is now also using Motmodem.
4.  Motport.sys:  new USB COM port driver.  This driver is not yet signed for CDMA dual mode and Salinas but we are targeting the 2.7 package for this.
5.  The installer executable will remove old copies of the WDF coinstaller (pre-RTM 6000 version).
6.  The logic to clean up the DriverStore has been improved after a few issues with some users.
7.  Add LTE config-11 interfaces for DSP logger.
8.  Add a shortcut in the Driver Installer program group to disable serial number usage on all devices.
9.  Clear up conflicts between different versions of motswch driver.
10.  Upgrade motfilt and motswch drivers to version 6.0.0.0 and pass PREfast.  The former will resolve partial installation failures causing missing drivers at device installation time.

2.5.0.0 -> 2.5.2.0
1.  Motousbnet.sys:  update to 1.3 to work around bulk timeout issue on Ascension for GNPO.
2.  Installer executable:  silent mode speed enhancements (remove unnecessary steps)
3.  Installer executable:  use latest DIFXAPI DLLs from Vista RTM WDK

2.4.2.0 -> 2.5.0.0
1.  Official release containing the Motorola USB Networking driver (motousbnet.sys).
2.  Updated MCCI inf and drivers for V2000 and Izar phones.
3.  Updated P2k.inf for Motorola iDEN Interface.
4.  Updated driver installer EXE with enhanced suppression of driver not signed warning messages in Windows XP (x86).
5.  Updated driver MSI package to run driver installer EXE with elevated privileges (required for Windows Vista).
6.  Updated driver MSI package  to add shortcut for usblan_ifconfig.exe to user’s programs menu.
7.  Changed Motorola_Driver_Installer_Log.txt location to “Program Files\Common Files\Motorola Shared\MotPCSDrivers” directory.

2.4.1.0 -> 2.4.2.0
1.  Include new Motousbnet.sys and remove all BLAN drivers.

2.4.0.0 -> 2.4.1.0
1.  Updated P2k.sys to 2.5 to resolve E815/RSD issue with fast mode switching.

2.3.0.0 -> 2.4.0.0
1.  Removed duplicate PIDs between Motmccip2k.inf and P2k.inf.
2.  Updated x64 P2k.inf to reflect 2.4.0.0 version.
3.  WHQL Q MOL2 (C5e) PID support for modem (Rev_0003).
4.  Removed unnecessary file copy directive from Electra host controller INF file.
5.  WHQL CDMA dual mode support for 2B44 PID (MSM6125 / Jefferson/Jackson).

2.2.0.0 -> 2.3.0.0
1.  Updated P2k.inf with the 3021 temporary PID and WHQL configuration 11 PIDs for LTE
2.  Updated with the following WHQL certifications
	- QualComm 6125 Boot loader
	- QualComm 6125 Composite Mode
- Q MOL2 software
3.  Updated the driver installer EXE with more logging information about the target system and installed driver MSI package
4.  Updated the Driver installer exe due to updating caused a driver to be removed for other configurations
5.  Added Q GSM Modem and flash PIDs to smartfonnw.inf and p2k.inf
6.  Added Commercial FOMA drivers for IZAR
7.  Updated the P2k.sys to version 2.4 for multi access issue.

2.1.0.0 -> 2.2.0.0
1.  Updated USBSER2k.inf and USBSERXP.inf to copy the driver files
2.  Updated the P2k.inf to support V2000 Boot loader PID
3.  Updated Electra M2501uc.inf to remove the Uninstaller registry reference

2.0.0.0 -> 2.1.0.0
1.  Updated motmccip2k.inf to support config 11 WHQL changes
2.  Updated the P2k.inf and USBMot2000.inf to include unsupported PID for 3022 and 3021.
3.  Updated Motdmmtp.inf to support WHQL changes
4.  Updated Electra drivers to latest versions
5.  Updated Netmon INFs and drivers

1.7.0->2.0.0
1.  Updated driver installer executable to newest version.  Removed old versions of the GUI and non GUI executables
2.  Added support for CDMA ZLP issues to load modified drivers on the PC.
3.  Added 64 bit support for the driver installer, INF files and for the Motorola P2K driver.
4.  Added Neptune LTE ROM for the Motorola P2K driver
5.  Added new IOCTL to retrieve the device descriptor of the device for the Motorola P2K driver
6.  Updated with the following WHQL certifications
	- Motorola Q Modem
	- Motorola Q MBM
	- QualComm 6550 Dual Modem Mode

1.6.1->1.7.0
1.  Updated with the following WHQL certifications
	- Argon/SCMA-11 Boot loader
	- Argon/SCMA-11 Modem Mode
	- Argon/SCMA-11 Configuration 8
	- QualComm 6500 Dual Modem Mode
	- QualComm 6500 Single Modem Mode

1.6->1.6.1
1.  Updated USBMOT2000.INF for mot switch driver copying

1.5->1.6
1.  Updated motodrv.inf with the following WHQL certifications
	- Neptune LTE Bootloader
	- Neptune LTE Configuration 8 (Composite Mode)
	- QualComm 6550 Bootloader
	- QualComm 6550 Configuration 8 (Composite Mode)
	- QualComm 6500 Bootloader
	- QualComm 6500 Configuration 8 (Composite Mode)
2.  Adding common motswitch driver to devices so that there is a common switch IOCTL for all USB configurations
3.  Updated P2K.sys for Electra 2 flash switch issue
4.  Added Q modem INF to installation package

1.4->1.5
1. Updated motcomp2k.inf for Windows 2000
2.  Updated P2K.inf with Jefferson and Locosto PIDs
3.  Updated Installation tool to update files listed in the ini instead of removing and reinstalling the INFs
4.  Added registry entries into the installation tool to track INF directories and installation state of the INFs and drivers.
5.  Added temporary support for Kenai Dual mode.  These are evaluation drivers and will need to be removed once the license is expired.
6.  Removal of the pre installed INFs prior to installing 1.5 is mandatory.  From this point on only files that are updated will need to be updated.

1.2->1.4
1. Updated the Driver installer executable to support modified End user driver packages that do not contain Motorola proprietary drivers
2.  Update the MSI to include a registry entry for version information
HKEY_LOCAL_MACHINE\SOFTWARE\Motorola\Motorola Driver Installation\Version


1.1-> 1.2 
1. Added LTE Modem WHQL INFs
2. MCCI and P2K INFs updated to support MTP + Datalogging modes
3. Added WHQL certified motodrv.sys and motodrv.inf for CDMA1x Composite mode
4. Added Electra PCMCIA card drivers
5. Added Commercial FOMA drivers
6. Added CDMA1x Dual mode MCCI evaluation drivers


1.0-> 1.1 
1. Update P2K.sys from 2.0 to 2.1 driver