[ROUTERS] Configurar Router Encore Speedy AYUDA!!!!

NO logro hacer conectar al modem ENDSL-AR4 para speedy?

Tengo este log del test q hace el modem.
Checking LAN Connection
Testing Ethernet LAN connection PASS HELP
Checking ADSL Connection
Testing ADSL Synchronization PASS HELP
Checking Circuit 0 for Network Connection
Test ATM OAM Segment Loop Back PASS HELP
Test ATM OAM End-to-End Loop Back PASS HELP
Test Ethernet connect to ATM PASS HELP
Test IP connect to Ethernet FAIL HELP
Testing Internet Connection
Ping primary DNS SKIPPED HELP
Query DNS for www.conexant.com SKIPPED HELP
Ping www.conexant.com SKIPPED HELP

Este es el log q me da el modem.


01/01/1970 00:02:33> ADSL disconnected
01/01/1970 00:02:33> ATM Disconnected
01/01/1970 00:02:01> ATM Tx Error Count: 0, Rx Error Count: 0
01/01/1970 00:02:01> u/s total bit capacity: 87bits, used: 87bits
01/01/1970 00:02:01> d/s total bit capacity: 1820bits, used: 264bits
01/01/1970 00:02:01> d/s Latency: FAST, u/s Latency: FAST
01/01/1970 00:02:01> d/s Data Rate: 1024kbps, u/s Data Rate: 256kbps
01/01/1970 00:02:01> d/s Attenuation: 32.1dB, u/s Attenuation: 19.0dB
01/01/1970 00:02:01> d/s SNR: 34.1dB, u/s SNR: 31.0dB
01/01/1970 00:02:01> CO Vendor: ALCATEL_NETWORK
01/01/1970 00:02:01> Max Tx Power: -38dBm/Hz
01/01/1970 00:02:01> Annex Mode: ANNEX_A
01/01/1970 00:02:01> Modulation: T1_413
01/01/1970 00:02:01> ADSL connected
01/01/1970 00:02:01> ATM layer is up, cell delineation achieved
01/01/1970 00:02:01> ATM Connected
01/01/1970 00:00:06> Firewall is enabled.
01/01/1970 00:00:06> Firewall is loaded.
01/01/1970 00:00:06> CfgMgr: 'Fwbsd.dlz' module loaded.
01/01/1970 00:00:06> CfgMgr: 'Prism.dlz' module loading failed.
01/01/1970 00:00:06> CfgMgr: 'Washer.dlz' module loaded.
01/01/1970 00:00:00> CfgMgr: 'Shtm.dlz' module loaded.
01/01/1970 00:00:00> ZDev device loaded OK.
01/01/1970 00:00:00> Initialized Dynamic NAPT.
01/01/1970 00:00:00> ATM: Setting up vcc0, VPI=8, VCI=35
01/01/1970 00:00:00> ATM: Detected
01/01/1970 00:00:00> Ethernet Device

Si alguien me puede ayudar.
Ahi pongo el screen de mi configuracion.

Por si lo necestian a mi con esta configuracion me anda....
Javier