Por favor, como se cierra el puerto 135 con el firewall Sygate?

ya le puse los parches
pero como se bloquea el inbound que decis
muchisimas graciasss

Listo el que necesite encontre esto
SAludos



If you have Sygate Firewall and want to block port 135...

I have Sygate free.

After each set of entries click add

Try setting an "advanced rule" to block Port 135;
1. From Main Screen Select Menu's... {Tools} {Advanced Rules}.
2. Choose "Add" to create a new rule.
3. On General Tab:
Give rule a description
Choose "Block All Traffic"
Choose "Apply to all network interface cards"
Choose to Apply this rule during screen saver mode "Both on and off"
4. On Hosts Tab:
Choose to apply this rule to "All Addresses"
5. On Ports and Protocols tab:
Choose "TCP" as protocol.
Leave Remote port blank.
Type in "135" in the Local Port box.
Choose "Both" for traffic direction.
6. On Scheduling Tab:
Disable scheduling
7. On Applications tab:
Do not check any applications.

*When you have all the settings entered,click "ok" to create the rule.
Then,run the GRC test,and it should show as stealthed.

Go to top of Sygate screen and choose "test" tab...next screen choose "Stealth Scan"...next screen choose "scan" and wait...everything should be blocked..